Brown Brothers Engineers is the distributor of Lowara pumps throughout New Zealand and Australia and offer solutions for a diverse range of markets, including commercial, building service, industrial, agricultural, and domestic.

Lowara is a recognised world leader in stainless steel pump manufacturing technology ranging through turbine, centrifugal and submersible pumps with a range of pumps including vertical multistage, in-line, end suction close coupled, peripheral turbine, small horizontal multistage, jet, submersible bore hole, drainage and de-watering pumps, as well as booster and domestic pressure systems.

Whether fresh, clean water, or water, wastewater, and water management, Lowara has a full range of premium pumps for all your water requirements.

Borehole Pumps

Lowara e-GS

The e-GS series is a robust 4” pump designed for long life. It’s built mainly in stainless steel, has casted discharge and a special floating impeller design to enhance the wear resistance and to maintain the performance over time.

Key Features:

• Proven Design: Featuring a 25-year-proven floating stack hydraulic design with proven efficiency. The Lowara e-GS is one of the best pumps on the market for sand handling capabilities.
• Reliable: With abrasion resistant polymer and stainless-steel materials used throughout construction, you can be sure that no matter the application process these pumps will last.
• All e-GS pumps can be coupled to 4” NEMA standard motors.

Lowara Z Series

Assuring low maintenance and ease of management, the Lowara Z Series 6”, 8”, 10” and 12” submersible borehole pump range epitomises a durable and robust stainless-steel design with high efficiency for peak below ground performance.

Key Features:

• Robust, durable and lightweight assures high efficiency
• Low maintenance costs and ease of management
• Guide bearings and wear rings assure high resistance to wear and constantly reliability of hydraulic characteristics
• Pumps can be coupled to all NEMA standard motors.

Multi-Stage Pumps

Lowara e-HM Series

The e-HM Series is a non-self-priming, end-suction horizontal multistage, high pressure centrifugal pump, with axial threaded inlet and radial threaded outlet. With a close-coupled design and equipped with non-standard Lowara motors, the e-HM range are highly modular pumps that are fitted with an innovative hydraulic design that secures high efficiency performances and an increased Mean Time Between Failure.

Key Features:

• Built to last – No compromise on quality, thick stainless steel construction and highest quality bearings guarantees a long service life
• The motor – The latest technology built into the motor, this means IE3 efficiency standards along with Australian Standard Electrical Certifications ensure safety and efficiency is not compromised.
• The Pump – 30 years of continual product improvement puts the “working end” of the system in a class off it’s own. Hydraulically one of the most efficient pumps you could choose for your pumping application. AS/NZ 4020 compliant
• Whisper quiet – Even when operating at peak demand the noise levels from the e-HM range are very low thanks to the build quality and materials used.
• European Build Quality – Manufactured in Italy, Lowara’s 54 years of engineering quality and product design is respected across the globe.
• Huge range - The perfect solution for most buildings; from family houses up to 10 floor apartment buildings.

Lowara e-SV Series

The e-SV™ pumps are tough, efficient and built to last. Thanks to a unique combination of new hydraulic design and higher efficiency motor, the e-SV™ delivers lower overall life-cycle costs and superior efficiency compared to most pumps available today.

Key Features:

• Built to last – No compromise on quality, thick stainless-steel construction and highest quality bearings guarantees a long service life.
• High Efficiency – The e-SV’s hydraulics combined with high-efficiency motor (IE3) deliver maximum efficiency.
• Whisper quiet – Even when operating at peak demand the noise levels from the e-SV range are very low thanks to the build quality and materials used.
• Easy to maintain – Design allows removal of the mechanical seal without removing the motor.
• Large range - 11 different models that can be specially configured for a wide range of applications.

Drainage Pumps

Lowara DOC and DOMO Range

Whether it’s for home or commercial sites, small storm water pits or emergency situations, you’ll be ready for all situations with the Lowara DOC and DOMO range of drainage pumps. Ideal for solid-laden wastewater, emptying of wells and tanks in industrial and ecological applications, as well as emergency drainage in flooded areas.

Click on each image below for more information:

Key Features:

• Compact and Lightweight - Built with a compact motor and lightweight corrosion resistant materials, Lowara Drainage pumps are easy to carry, install and service. These pumps have proven themselves with years of reliable service.
• European Build Quality - Manufactured in Italy, Lowara’s engineering quality is renowned across the world. The Lowara DOC and DOMO pumps are constructed from corrosion resistant materials utilising stainless steel and other engineered composite materials ensuring versality and durability.

Booster/Pressure System Pumps

Lowara Hydro Pac Booster System

Hydrovar, the modern variable speed drive taking pumping to a new level of flexibility and efficiency. Packaged Hydro Pac's are from one to maximum of 8 pumps.

Key Features:

• Pump: Vertical multi-stage or Horizontal pumps
• Variable Speed Drive: Hydrovar
• Isolating and Check valves
• Aquastat: For dry run protection
• Pressure transducer on each pump
• Pressure gauge
• Pressure tank: Size to suit the flow

At Brown Brothers Engineers we have extensive capabilities with a wide range of quality pump manufacturers. Contact us today to discuss your pumping requirements.