Pressure / Flow Controller

The PresFlo electronic pressure flow regulator starts/stops the pump based on demand. It is capable of satisfying the most varied of needs while guaranteeing the pump works reliably and safely. It substitutes a traditional pressure switch/surge tank system while offering reduced dimensions, no maintenance requirements, constant flow and pump protection.

*Now with Plug & Play leads.

Product Features:

  • Spring loaded water accumulator guarantees high level of protection against over pressure and preventing excessive running and stopping. No need to fit air expansion tanks
  • Body with built in check valve. Sturdy, techno polymer body, suitable for use in drinking water distribution systems
  • Ease of use and monitoring through flashing LEDS and built in pressure gauge
  • Tropicalised circuit board assures complete protection against moisture
  • Systems protection against dry running and excessively frequent starts
  • Available in 1.5 bar and 2.0 bar start pressure models
  • Shuts down flow rate of 2 litres per minute

Specifications

  • Max flow rate: 200 l/min
  • Voltage: 230 Volt a.c.
  • Frequency: 50 Hz
  • Max Current: 16 Amp
  • IP Protection: IP 65
  • Working temperature: 0 – 65 °C
  • Connections: 1" BSP female 3 piece union
  • Working/bursting pressure: 10 Bar / > 40 Bar
  • Weight: 1.45Kg
  • AS4020 Approved

Applications

  • Domestic water supply
  • Lawn and garden irrigation
  • Water transfer

Models

  • PF1615P, PF1622P

Delivering Pumping Solutions® Since 1908